Read the Ads page
You'll see what personalization earned from your Meta ad spend, where that spend lands, what to do next, and how each running ad, landing page, and segment is doing.
The Ads page puts your ad spend next to what happened on your site. It leads with what personalization earned you, shows where your Meta spend lands, and lists the few things most worth doing next. Under that, tabs break the results down by running ad, landing page, and segment, and show the gaps no ad covers yet.
Pick the period and the goal
At the top right, choose 7 days, 14 days, or 30 days. Each period covers complete days up to yesterday, in your ad account's time zone.
Beside it, the Goal menu shows the goal that means an ad worked, such as a booking or a signup. A visitor counts as a conversion when they reach that goal after their ad visit. The goals your landing page campaigns record come first, under On your landing page campaigns. Other goals (no holdback comparison) still count conversions, but can't show personalization lift, because no campaign on your landing pages measures them. Create a new goal opens the goal editor and brings you back with the new goal selected.
Until you pick one, RightMessage counts the goal of the campaign on your busiest landing page. It prefers a campaign with A/B testing on, because that's the campaign lift is measured on, and when several are testing, the one with the largest holdback. If it can't find a goal, the page asks Which goal counts as a conversion? and lists your goals with how often each was recorded. The page remembers your choice the next time you open it.
The line under the title shows your ad account, when it last synced, and how new ads are handled: New ads: Review first or Apply automatically. Connect Meta Ads covers syncing, and Turn your ads into audiences covers new ads.
What personalization earned you
The first panel answers whether personalizing your landing pages paid off for your ad traffic. It compares ad visitors who saw a personalized page with the share your campaigns keep on the standard page, over the period and goal you picked.
When personalization is ahead, it shows a dollar figure, such as $3,400 in extra ad value: what the extra conversions would have cost you on the standard page. The sentence under it gives the ad spend that reached personalized visitors, the conversions it brought, and what the same number of conversions would have cost on the standard page. Beside it, Personalized and Standard page show each side's conversion rate and cost per conversion.
A tag says how sure the number is:
| Tag | It means |
|---|---|
| Settled | The whole likely range is above (or below) no difference. |
| Not settled | The difference could still be no difference. The figure reads so far. |
| Too early | Either side has fewer than 10 conversions. |
Choose How this is worked out for the goal, the spend on personalized visitors, the extra conversions, what each is valued at, and the likely range. It also estimates what you're not earning yet, at the same lift, from visitors on the standard page and from spend on pages with no campaign. How lift is measured on the Ads page explains the comparison.
When there's no dollar figure, the panel says why:
- Personalization is live on N pages: A/B testing is off, so every ad visitor sees the personalized page and there's nothing to compare. Pick how many see the standard page (50 / 50, 80 / 20, or 90 / 10) and choose Start measuring. That saves the holdback to your draft and opens the publish review; nothing changes on your site until you publish.
- A percentage instead of dollars: the comparison is too early, the lift is zero or below, or your spend is in more than one currency.
- Your personalized pages don't record goal: attach the goal to the campaign on your landing page.
- No personalized page is measured yet: personalize a landing page and keep a share of its visitors on the standard page.
Where your Meta spend lands
The bar under it splits all your Meta spend in the period, paused ads included, so the total matches Ads Manager. Its line gives the total, how much went to your site, and your cost per conversion. The bar's parts are:
| Part | What it covers |
|---|---|
| personalized and in a test | Pages with a live campaign that keeps a share on the standard page. |
| personalized, not measured | Pages with a live campaign but no comparison, such as A/B testing off. It reads personalized, goal not attached when a campaign doesn't record your goal. |
| on pages with no campaign | Every visitor sees the standard page. |
| off-site | Ads that send people somewhere other than your site. They're left out of visitors and cost per conversion. |
| link unknown | Ads whose link neither Meta nor their visits show. They're left out too. |
Do next
Do next lists up to three things, the ones that affect the most running-ad spend first:
| Item | When it appears | Button |
|---|---|---|
| Add RightMessage to your landing pages | No visitor has been recorded on any landing page. It always comes first. | Get the snippet |
| Personalize page | Your highest-spend landing page has running ads and no campaign. | Personalize with Righty |
| Map N running ads | Running ads have no audience, so their visitors see the standard page. | Review recommendations or Choose audiences |
| Review N suggested segments | Righty suggests new segments for running ads none of yours fit. | See suggested segments |
| Measure page | A personalized page has A/B testing off. | Start measuring, with half of its visitors on the standard page |
| Attach the goal to campaign | A personalized page's campaign doesn't record your goal. | Attach goal |
Before your first campaign: Getting started
If none of your landing pages has a live campaign yet, the top of the page is a Getting started checklist built from your own ads instead. It walks through connecting Meta, adding RightMessage to your landing pages, choosing a goal, saying who each ad speaks to, personalizing the page that gets the most spend, and measuring it. Beside it, Your ads sums your running ads and spend, and Where your ad spend lands lists your top landing pages with Personalize with Righty.
Until a campaign is live, only the Running ads and Landing pages tabs appear.
Running ads
Each row is one ad that's running now, with copies of it in other ad sets counted together and marked copies. It shows the ad's audience, spend, visitors, conversions with the conversion rate, and Effectiveness. Rows are sorted by spend. Filter by All running, Needs mapping, Mapped, or Page not personalized.
When your running ads land on two or more pages, Landing pages, beside Sorted by spend, narrows the list to the pages you tick. Each page shows how many running ads land there, and All landing pages ticks or clears every page. While it's narrowed, the button names the page, or the number you picked, such as 2 landing pages, and its ✕ shows every page again. The counts on All running, Needs mapping, and the other filters then cover only those pages' ads. Ads whose landing page isn't known show only with every page ticked.
Effectiveness compares the ad's cost per conversion with your typical running ad's:
| Level | When |
|---|---|
| High | At most 0.8 times the typical cost per conversion. |
| Medium | Up to 1.25 times the typical cost. |
| Low | More than 1.25 times, or it spent more than 10 typical conversions' worth without reaching 10 conversions. |
| Too early | Fewer than 10 conversions, or none of your running ads has 10 yet, so there's no typical cost to compare with. |
A mapped ad lists its segments and whether they're Live or Live after you publish, and who chose them: auto-matched, set by you, or from your segment rules. Edit opens the audience picker. An ad without an audience says Not mapped yet and shows what Righty recommends, with Accept, Choose different segments, and Skip for now. When Righty suggests a new segment for ads that already have an audience, a Suggested line under their segments and a banner above the table ask about it. Turn your ads into audiences covers all of these.
Paused and ended ads are folded into one row at the bottom, with what they spent in the period. Open it to see each one's audience and when it last ran. They're left out of the counts above.
Ad details
Choose an ad to open its details. The top shows whether it's running, its spend, visitors, conversions, and effectiveness, its cost per conversion against your typical running ad, and its own lift, which is usually too early on one ad's data. Tracking problems, such as No tracking link, show here too.
The ad shows it the way it appears in the feed. The primary text folds after three lines, with See more to read the rest. Under it are the image, cropped square, then the link's domain, the headline, the description, and the button, such as Learn more. Meta sends a video ad's cover image. When Meta doesn't share an image, the card says so. If the image doesn't load, it refreshes with the next hourly sync.
Audience lists the ad's segment in each group, with Edit audience. What these visitors see names the landing page and its campaign, with Preview the page as this ad's visitor, which opens the campaign as that ad's visitors see it. How we know a visitor came from this ad shows the URL parameter that identifies its visitors and how many carried it. When the ad runs as several copies, Where it runs lists them.
Landing pages
Every page your running ads send people to, with its ads, spend, visitors, conversions, and Lift vs standard page. Filter by Personalized, Not personalized, or Can't personalize yet. Pages only paused or ended ads sent people to are folded together at the bottom, and ads that send people off your site are summed in a last row.
Personalization says whether the page is Personalized, with its number of versions and holdback, or Not personalized. Can't personalize yet gives the reason, such as a page that isn't on one of your project's websites, or ads without a tracking link or an audience.
When an ad's link isn't in Meta, as with an ad built on an existing Page post, RightMessage uses the page most of its visits land on, once at least three page views carrying its ID reach one page on your site. The ad's details say so.
Open a personalized page to check it: Goal attached, Ad visitors recognized, Goal recorded, and whether some visitors see the standard page. Preview page and Open campaign link to it. Its audience table lists every ad audience landing there, how many changes its version has, and its own lift. An audience without a version shows No version and Personalize for segment. An own version that also depends on another segment, such as a booking status, says For visitors also in that segment.
When an audience's version converts often enough to test, it shows a suggestion such as "42 conversions in the last 30 days, enough to compare two versions in about 3 weeks", with Test another version, which opens the campaign's Testing tab. It appears only when that version isn't being tested yet and two versions would each reach about 10 conversions within four weeks. If your plan doesn't include A/B tests, it offers an upgrade instead.
Personalize a landing page with Righty
Choose Personalize with Righty on a page that isn't personalized. Righty builds one draft campaign for it with an audience for each segment its ads use, and writes each audience's copy for what its ads promise. Each segment group gets its own part of the page, such as the headline, the line under it, and the call to action, so every combination of ads reads naturally. It attaches the goal you're counting so the campaign measures it.
Righty only drafts. It doesn't publish or start A/B tests. Preview the campaign, then publish when you're happy with it.
Segments
By group totals your ads per segment, one table per segment group, with ads, spend, visitors, conversions, cost per conversion, lift, and Page version: Own version, Sees default content (with Personalize), or Own version on some pages. An ad counts under every segment it's in, including segments it gets from your segment rules, so the rows don't add up to a total. Each group notes how many running ads have no segment in it, with Map these ads.
Combinations crosses two segment groups, such as Business type × Email platform, and shows one row for each pairing that has ads, with Preview for each. Pick the two groups with the menus above the table; it needs ads mapped in at least two groups. Rates and costs from fewer than 10 conversions are faded, because they move a lot.
Gaps
Gaps lists where an ad, an audience, and a page version don't line up, biggest first.
- Visitors with no ad speaking to them: pairings of two segment groups that had at least 50 visitors on your site in the period but no running ad for them. Each gives an Ad link to copy into Meta, warns when your landing page has no version for that audience yet, and offers Draft an ad with Righty.
- Ads with nothing personalized behind them: landing pages with no live campaign, running ads with no audience, and segments with ads but no page version, each with a button to fix it.
- Compare two segment groups: a grid of the two groups with how many ads cover each pairing and the gaps marked.
Lift report
The Lift report has one row per test: each personalized landing page that keeps a share on the standard page. It shows both sides' conversion rates, the lift with its likely range, and the extra ad value. With more than one test, All tests shows the comparison from the top of the page, with the same value. Below, it lists the pages it can't measure yet and why. How lift is measured on the Ads page explains how to read it.